Showing 41–60 of 89 results
-
Product Description:
CTO (Chlorine, Taste, and Odor) slim filters are carbon block cartridges designed to reduce chlorine, bad taste, odors, and certain organic chemicals from water. Made from high-quality activated carbon, they are ideal for improving water quality in residential and light commercial applications.
Key Features:
-
Effective Chlorine Removal
-
Improves Taste & Odor of drinking water
-
High-quality Activated Carbon Block
-
Slim Design – Fits standard 2.5″ filter housings
-
Available Sizes – 10″ and 20″ lengths
Specifications:
-
Outer Diameter: 2.5″ (Slim Type)
-
Lengths: 10″ and 20″
-
Micron Rating: 5 µm (standard)
-
Maximum Flow Rate: 3–5 LPM (depending on size)
-
Maximum Pressure: 125 PSI
-
Operating Temperature: 4–52°C (39–125°F)
Applications:
-
Point-of-use (POU) and under-sink systems
-
Pre-filtration for RO units
-
Residential drinking water systems
-
Light commercial filtration
-
Product Description:
CTO Jumbo filters are high-performance carbon block cartridges designed to reduce chlorine, bad taste, odor, and organic chemicals from water. With a larger 4.5″ diameter, they offer high flow rates and long service life, making them ideal for whole-house and commercial applications.
Key Features:
-
Removes Chlorine, Taste, and Odor (CTO)
-
Made from High-Quality Activated Carbon
-
Large Diameter for Higher Flow and Capacity
-
Ideal for Whole-House & Commercial Use
-
Fits 4.5″ Jumbo Filter Housings
Specifications:
-
Outer Diameter: 4.5″ (Jumbo Size)
-
Lengths: 10″ and 20″
-
Micron Rating: 5 µm (standard)
-
Flow Rate: Up to 20–40 LPM (varies by size)
-
Max Pressure: 100 PSI
-
Operating Temp: 4–52°C (39–125°F)
-
Chlorine Reduction Capacity: ~20,000–40,000 liters (depending on usage and size)
Applications:
-
Whole-house water filtration
-
Commercial water systems
-
Pre-treatment for RO systems
-
Food & beverage processing
-
Improving taste and odor in municipal water
-
A compact and reliable metering pump designed for precise chemical dosing in water treatment systems. With a 6 litres per hour dosing capacity and 4 bar pressure, it ensures stable and accurate performance for RO plants, industrial processes, and dosing applications.
Key Features
-
Digital control panel for easy and precise dosing adjustment
-
Flow rate: 6 LPH
-
Pressure rating: 4 Bar
-
High chemical compatibility – suitable for chlorine, antiscalants, acids, alkalis, etc.
-
Compact & durable design for continuous operation
-
Efficient solenoid-driven technology
-
Ideal for RO plants, STP/ETP, cooling towers & industrial dosing systems
Applications
-
Water treatment & purification
-
Chemical dosing for RO systems
-
pH correction, chlorination, antiscalant dosing
-
Industrial process dosing
-
The Dosing Pump Circuit is an electronic control board designed to manage and regulate the operation of solenoid-driven dosing and metering pumps. It controls stroke frequency and timing to ensure accurate, consistent, and reliable chemical dosing. Built with high-quality electronic components, the circuit provides stable performance and protects the pump against voltage fluctuations and overload conditions.
This circuit is suitable for continuous operation in water treatment, RO plants, and industrial chemical dosing applications.
Specifications:
-
Type: Electronic control circuit for dosing pump
-
Application: Solenoid dosing / metering pumps
-
Input Voltage: 220–240 VAC (other voltages on request)
-
Frequency: 50/60 Hz
-
Control Function: Stroke and speed regulation
-
Construction: High-quality PCB with durable electronic components
-
Protection: Over-voltage and stable power regulation
-
Mounting: Panel / pump-mounted (model dependent)
-
Operating Environment: Indoor, dry conditions
Applications:
-
Water and wastewater treatment
-
RO and filtration systems
-
Chemical dosing and metering units
-
Industrial process control
-
The Dosing Pump Coil is an electromagnetic component used to drive the operation of solenoid dosing and metering pumps. It generates a magnetic field that moves the pump mechanism, allowing accurate and consistent chemical dosing.
Designed for reliable performance, the coil is made with high-quality insulation and durable materials to ensure long service life in water treatment and industrial applications.
-
The Dosing Pump Coil Housing is a durable protective enclosure designed to safely house the electromagnetic coil of solenoid-driven dosing and metering pumps. It provides reliable insulation and mechanical protection, ensuring stable pump operation in demanding industrial and water treatment environments.
Manufactured from high-quality, chemical-resistant material, the coil housing protects the coil from moisture, dust, chemical splashes, and physical damage. Its precise fit and robust construction help maintain consistent magnetic performance, extend coil life, and reduce downtime.
Key Features:
-
Designed for solenoid dosing and metering pumps
-
Strong, corrosion- and chemical-resistant housing
-
Protects coil from moisture, dust, and external damage
-
Ensures stable and efficient pump operation
-
Easy installation and secure mounting
-
Suitable for water treatment, RO plants, chemical dosing, and industrial applications
Applications:
-
Product Description:
GAC Jumbo filters are high-capacity carbon cartridges filled with premium granular activated carbon (typically coconut shell-based) designed to remove chlorine, unpleasant taste, odor, and organic contaminants from water. With a 4.5″ wide body, they provide high flow rates and longer service life, making them ideal for whole-house and commercial filtration systems.
Key Features:
-
Reduces Chlorine, Taste, Odor & Organic Compounds
-
High-Quality Coconut Shell Granular Activated Carbon
-
Large Diameter for High Flow and Long Lifespan
-
Includes Post-Filters to Prevent Carbon Fines
-
Fits Standard 4.5” Jumbo Filter Housings
Specifications:
-
Outer Diameter: 4.5″ (Jumbo Size)
-
Lengths: 10″ and 20″
-
Flow Rate: Up to 20–40 LPM (depending on size)
-
Operating Temperature: 4–52°C (39–125°F)
-
Max Pressure: 100 PSI
-
Chlorine Reduction Capacity: Up to 40,000 liters (varies by usage and water quality)
Applications:
-
Whole-house water filtration
-
Commercial and light industrial systems
-
RO system pre-filtration
-
Food & beverage water treatment
-
Improving taste and odor of municipal water
-
UF WATER FILTER POT
FEATURES:-
AMRUT has best water purification technologies. It has advantages over other
water purifiers as it offers you the following features.
Polypropylene Cartridge Filter made from high Polypropylene material.
0.5 micron tiny porous structure, it removes dirt, sand particle & Bacteria.
0.1 microns hollow Fiber hydrophilic UF membrane by high removal
capability of bacteria, viruses, colloids and silt.
There is No chemical required & No Power Required.
No any wastage of the water.
Elegant & Compact size design with 7Ltr raw water & 13Ltr purified
storage of water.
Equally suitable for water such as River water; surface water; city council
water.
Easy to installed & not required any expert for installation.
TECHNICAL SPECIFICATIONS:-
Product AMRUT Gravity UF water Filter Pot
Application Suitable for drinking water for Low TDS Water
Purification Capacity 15 ltr/hr
Purify Water Speed 0.25Liter/minute
Body material Food grade virgin Plastic
Mounting On Table
Filter Polypropylene Cartridge Filter; UF Filter cartridge
Expected Life of UF Membrane 4000 Liters
Storage tank capacity 6Ltrs Raw; 10Ltr Purified
APPLICATIONS:-
For Home & Office usages
Suitable for water from all types of source like river water; surface water; city council water.
Compact design required less space for installation
DATASHEET
-
INOVA Carbon Filter 10”
Removes chlorine, bad taste, odor, and chemicals using activated carbon. Improves the taste and smell of water.
-
10” standard size
-
High-quality activated carbon
-
Better-tasting, cleaner water
-
Simple to install and replace
-
Product Description:
The Semi-Automatic 5 Gallon / 20 Liter Water Jar Washing Machine is designed for efficient and hygienic cleaning of water jars used in bottled drinking water plants. The machine performs thorough internal and external washing using high-pressure water jets, ensuring removal of dirt, residue, and contaminants before refilling.
Built with a durable stainless steel structure, it offers reliable performance, easy operation, and low maintenance. Ideal for small to medium packaged drinking water units.
Specifications:
-
Machine Type: Semi-Automatic Jar Washing Machine
-
Jar Capacity: 5 Gallon / 20 Liter
-
Washing Process: Inside & outside high-pressure water washing
-
Body Material: Stainless Steel (SS)
-
Operation: Semi-automatic
-
Water Inlet: Standard industrial connection
-
Power Supply: 220–240 VAC, 50/60 Hz
-
Construction: Corrosion-resistant, hygienic design
-
Maintenance: Easy to clean and maintain
-
Installation: Floor-mounted
Applications:
-
10” Mineral Cartridge – Domestic Use
This 10-inch mineral cartridge is designed to enhance the quality of drinking water by adding essential minerals like calcium, magnesium, and potassium. It improves taste and helps maintain a healthy pH balance in water.
Features:
-
Standard 10” size – fits most RO and water purifier systems
-
Adds essential minerals to purified water
-
Improves taste and balances pH levels
-
Easy to install and replace
-
Suitable for domestic RO systems
Benefits:
-
Healthier, better-tasting water
-
Restores minerals lost during RO purification
-
Supports overall wellness
-
Long-lasting and low maintenance
Applications:
-
Product Description:
Pleated slim filters are high-efficiency cartridges designed to remove fine particles such as sediment, silt, sand, and rust from liquids. Made from pleated polyester or polypropylene media, these filters provide a large surface area for longer service life and higher dirt-holding capacity. They are reusable (if rinsed properly) and fit standard 2.5″ slim housings.
Key Features:
-
Efficient Removal of Sediment & Particles
-
Large Surface Area with Pleated Design
-
Washable & Reusable (in some cases)
-
2.5” Diameter – Fits Slim Filter Housings
-
Double Open End (DOE) Design
Specifications:
-
Outer Diameter: 2.5″ (Slim Type)
-
Lengths Available: 10″, 20″, 30″, 40″
-
Micron Ratings: 1, 5, 10, 20, 50 µm (other ratings available)
-
Material: Polyester or Polypropylene Media
-
Core & End Caps: Polypropylene
-
Max Operating Temperature: Up to 60°C
-
Max Pressure: 100 PSI
-
Flow Rate: 5–15 LPM (varies by size and micron)
Applications:
-
Residential & commercial water systems
-
RO pre-filtration
-
Food & beverage
-
Chemical and pharmaceutical industries
-
General sediment filtration
-
Product Description:
Pleated SOE filters are high-efficiency surface filtration cartridges designed for fine particle removal in water and other liquids. With a pleated design, they offer a larger surface area for extended life and improved dirt-holding capacity. These filters feature a Single Open End (SOE) connection—commonly 222 or 226 O-rings with fin or flat caps—for secure sealing in industrial and sanitary housings.
Key Features:
-
High Surface Area Pleated Media for long service life
-
Precise Micron Ratings for fine particle removal
-
SOE End Configurations: 222/Flat, 226/Flat, or Fin-style
-
Constructed from FDA-compliant materials (Polypropylene or Polyester)
-
2.5” Diameter – Fits Standard Slim Housings with SOE Connections
Specifications:
-
Outer Diameter: 2.5″
-
Lengths: 10″, 20″, 30″, 40″
-
Micron Ratings: 0.5, 1, 5, 10, 20, 50 µm (others available)
-
Material: Pleated Polypropylene or Polyester
-
Core & End Caps: Polypropylene
-
Seal Material: EPDM, Silicone, Buna-N, or Viton (depending on model)
-
Max Operating Temperature: 80°C
-
Max Pressure: 100 PSI
-
Flow Rate: 5–20 LPM (varies by micron and length)
Applications:
-
Pharmaceuticals & biotech
-
Food and beverage processing
-
RO system pre-filtration
-
Chemicals and solvents
-
Electronics & ultrapure water systems
-
Product Description:
The Pleated High Flow Filter Cartridge (6″ x 40″) is designed for high-volume filtration with superior dirt-holding capacity and flow rate. Its large 6-inch diameter and pleated surface maximize filtration area, reducing the number of cartridges needed and minimizing downtime. Ideal for industrial water treatment, reverse osmosis (RO) pre-filtration, and process water systems.
Key Features:
-
High Flow Rate – Up to 113 LPM (30 GPM) per cartridge
-
Large Surface Area due to pleated media
-
6” Outer Diameter, 40” Length
-
Reduces Sediment, Dirt, Rust, and Particulate Contaminants
-
Fewer Cartridge Replacements – Cost and Labor Saving
-
Easy Installation & Replacement
Specifications:
-
Outer Diameter: 6”
-
Length: 40”
-
Micron Ratings: 1, 5, 10, 20, 50 µm (custom options available)
-
Material:
-
End Connection: DOE or customized SOE (O-ring or flange options)
-
Max Operating Temperature: 80°C
-
Max Pressure: 100 PSI
-
Recommended Flow Rate: Up to 30 GPM (113 LPM) per cartridge
Applications:
-
Industrial water treatment
-
RO pre-filtration
-
Food & beverage processing
-
Power generation
-
Petrochemical and chemical processing
-
Cooling water filtration
-
Product Description:
Pleated PET (Polyester) filters are high-performance, washable cartridges designed for the removal of sediments such as sand, silt, rust, and dirt from water. Made from durable polyester media, these filters offer excellent chemical resistance and long service life. The pleated design provides a large filtration surface area for higher flow rates and better dirt-holding capacity.
Key Features:
-
Durable Polyester (PET) Filter Media
-
High Dirt-Holding Capacity
-
Reusable and Washable (with clean water)
-
Pleated Surface for Long Life & Efficiency
-
Available in Slim (2.5”) and Jumbo (4.5”) Diameters
-
Fits Standard DOE Filter Housings
Specifications:
-
Diameters:
-
Lengths: 10″, 20″, 30″, 40″
-
Micron Ratings: 1, 5, 10, 20, 50 µm (others available on request)
-
Media: Polyester (PET)
-
Core & End Caps: Polypropylene
-
End Style: DOE (Double Open End) standard
-
Operating Temperature: Up to 60°C
-
Max Pressure: 100 PSI
-
Flow Rate:
Applications:
-
Whole-house water filtration
-
Industrial & commercial systems
-
Food & beverage
-
Pre-filtration for RO systems
-
Cooling towers & general water processing
-
Product Description:
PP Spun Jumbo filters are high-capacity sediment filter cartridges made from 100% polypropylene. Designed for larger filtration systems, they effectively remove dirt, sand, rust, and other particles from water. These filters are ideal for whole-house and industrial water filtration.
Key Features:
-
100% Melt-Blown Polypropylene
-
Removes Sediment, Sand, Rust, and Particles
-
High Dirt-Holding Capacity
-
No Chemicals or Binders Used
-
Fits 4.5” Jumbo Housings
Specifications:
-
Outer Diameter: 4.5″ (Jumbo Size)
-
Lengths: 10″ and 20″
-
Micron Ratings: 1, 5, 10, 20, 50 µm (others available)
-
Operating Temperature: Up to 60°C
-
Max Pressure: 100 PSI
-
Flow Rate: Up to 20–40 LPM (depending on size and micron)
Applications:
-
Whole-house filtration
-
RO system pre-filtration
-
Commercial and industrial water systems
-
Food and beverage processing
-
Agricultural and well water filtration
-
Features:
- Made from 100% food-grade polypropylene
- Removes sediment, sand, silt, and rust
- High dirt-holding capacity
- No chemicals, binders, or adhesives
Specifications:
- Micron Rating: 1, 5, 10, 20, or 50 µm (varies by model)
- Size: 10” 20’’ 30’’ 40’’ x 2.5” (standard)
- Max Temperature: 60°C (140°F)
- Max Pressure: 100 PSI
- Flow Rate: Up to 5 GPM (varies)
Applications:
- Pre-filter for RO systems
- Whole house water filtration
- Well water and municipal supply
- Food, beverage, and industrial use
-
PVDF UF Membrane – 20″ Jumbo (4.5″ Diameter)
This 20-inch Jumbo UF filter uses strong PVDF material to clean water by removing bacteria, viruses, and dirt—without using chemicals. It keeps healthy minerals in the water and is great for homes and commercial use.
Features:
-
Made with durable PVDF membrane
-
Filters down to 0.01 microns
-
Size: 20″ length × 4.5″ diameter
-
High water flow
-
Easy to install and replace
Ideal for:
-
Whole-house filters
-
RO system pre-treatment
-
Drinking water systems
Benefits:
-
-
The 25 LPH Commercial RO Water Purifier is designed for shops, offices, hotels, schools, small industries, and drinking water supply points where continuous purified water is required. It efficiently removes TDS, hardness, chemicals, bacteria, and dissolved impurities, delivering safe and great-tasting drinking water.
This system operates automatically and is built using high-quality RO membrane, pre-filters, and food-grade tubing, ensuring long service life and reliable performance.
Key Features:
-
Purification Capacity: 25 Liters per Hour
-
Removes TDS, hardness, chlorine, heavy metals, and microbial contaminants
-
Includes RO Membrane, Sediment Filter, Carbon Filter, and Pump
-
Automatic ON/OFF Control with storage option (if required)
-
Low maintenance and energy efficient
-
Designed for continuous daily usage
FIVE STAGES
STAGE 1 – PP (SEDIMENT FILTER) / UF
STAGE 2 – PP
STAGE 3 – PRE CARBON FILTER
STAGE 4 – RO MEMBRANE
STAGE 5 – MINERAL CARTRIDGES
Suitable For:
-
Offices
-
Shops & Cafes
-
Schools & Coaching Centers
-
Clinics & Hospitals
-
Small Hotels & Restaurants
-
RO Water Dispensing Points
Ideal Water TDS Range:
