Showing all 3 results

  • Conductivity / TDS Indicator – Model: 510CT

    Conductivity / TDS Indicator – Model: 510CT

    0 out of 5
    What It Does

    • Measures conductivity (how well water conducts electricity)

    • Measures TDS (Total Dissolved Solids) in water

    • Used in water treatment, RO plants, and industrial applications

    • Key Features
    Feature Details
    Conductivity Range 0 – 2000 µS/cm (auto-ranging)
    TDS Range 0 – 2000 ppm
    Display Bright 4-digit LED
    Accuracy ±1%
    Calibration Manual (single-point)
    Sensor Stainless steel, with ½” or ¾” BSP thread
    Output Optional relay for alarms/control
    Power Supply 230V AC, 50 Hz
    Mounting Panel mount (96×96 mm)
    Benefits

    • Easy to install and use

    • Auto-switches between ranges

    • Can trigger alarms or valves (if relay is included)

    • Compact size fits in control panels

    Read moreDone
  • pH CONTROLLER MODEL: 505 M WITH pH Electrode DIC -05

    pH CONTROLLER MODEL: 505 M WITH pH Electrode DIC -05

    0 out of 5

    SPECIFICATIONS

    Model 505-M pH Specification
    Range 0-14pH 0-150c
    Resolution 0.01digit 1c
    Accuracy 0.1pH +/- 1 digit Of reading, 1c
    Dual Display Upper For pH (Red LED) & Lower for Temp. (Green LED)
    Temp. Compensation 0-150c Manual Or Auto ( PT-100)( Optional )
    Input Impedance 1012 Ohms
    Calibration 3 point Auto Calibration 7.0, 4.0 & 9.2
    Error Indication Out Off Buffers Range. (B) Slope Error
    Control Setting Two Set Point ( High & Low)
    Output 4-20mA D.C ( Optional )
    Controlling Output One Changeover Relay of Potential Free Contacts Of 5Amp
    Environment 5 to 50c.
    Supply 220v A.C +/- 10%, 50Hzs A.C
    Size 96 x 96 x 110 mm ( Gray Color ABS Plastic Housing, Panel Mount )
    Read moreDone
  • pH INDICATOR MODEL : Eco- 05 WITH pH ELECTRODE DIC-05

    pH INDICATOR MODEL : Eco- 05 WITH pH ELECTRODE DIC-05

    0 out of 5

    pH Indicator Model: Eco‑05 with Electrode DIC‑05

    Type: Digital pH Monitor for Water & Industrial Use

    ✅ What It Does

    • Measures the pH level of liquids (range: 0 to 14 pH)

    • Shows readings on a digital LED display

    • Comes with a pH sensor (electrode) to measure in tanks or pipes

    • Can be used in water treatment plants, labs, or industrial processes

    📦 What’s Included

    • Eco‑05 pH Indicator (panel-mount device)

    • DIC‑05 pH Electrode with 5-meter cable

    • Calibration buffer solutions

    • User manual

    📋 Key Features

    Feature Details
    pH Range 0.00 to 14.00
    Display 3.5-digit LED
    Accuracy ±0.1 pH
    Calibration Manual (2-point: pH 4 & 7 or 9.2)
    Power 230V AC, 50 Hz
    Mounting Panel mount (96×96 mm)
    Electrode BNC connector, ¾” BSP thread
    Electrode Use For clean water-based liquids only
    Optional Output 4–20 mA signal for control systems
    Read moreDone