Showing 261–280 of 790 results
-
Origin; Made in India
Application; Industry, Air, Steam, Water
DATASHEET
-
Glass media is a high-quality filter material made from cleaned and processed recycled glass. It is used in water filtration systems to remove dirt, suspended solids, and other impurities. It is a more efficient and longer-lasting alternative to traditional sand.
Main Uses:
Benefits:
-
Filters particles down to 5 microns
-
Long-lasting – up to 10 years
-
Uses less water during backwash
-
Reduces bacterial growth in the filter
-
Made from recycled material – environmentally friendly
Available Sizes:
| Grade |
Size Range |
Typical Use |
| Fine |
0.5 – 1.0 mm |
Bottom layer / fine filtration |
| Medium |
1.0 – 2.0 mm |
Main filtration media |
| Coarse |
2.0 – 4.0 mm |
Top layer / support media |
-
UF WATER FILTER POT
FEATURES:-
AMRUT has best water purification technologies. It has advantages over other
water purifiers as it offers you the following features.
Polypropylene Cartridge Filter made from high Polypropylene material.
0.5 micron tiny porous structure, it removes dirt, sand particle & Bacteria.
0.1 microns hollow Fiber hydrophilic UF membrane by high removal
capability of bacteria, viruses, colloids and silt.
There is No chemical required & No Power Required.
No any wastage of the water.
Elegant & Compact size design with 7Ltr raw water & 13Ltr purified
storage of water.
Equally suitable for water such as River water; surface water; city council
water.
Easy to installed & not required any expert for installation.
TECHNICAL SPECIFICATIONS:-
Product AMRUT Gravity UF water Filter Pot
Application Suitable for drinking water for Low TDS Water
Purification Capacity 15 ltr/hr
Purify Water Speed 0.25Liter/minute
Body material Food grade virgin Plastic
Mounting On Table
Filter Polypropylene Cartridge Filter; UF Filter cartridge
Expected Life of UF Membrane 4000 Liters
Storage tank capacity 6Ltrs Raw; 10Ltr Purified
APPLICATIONS:-
For Home & Office usages
Suitable for water from all types of source like river water; surface water; city council water.
Compact design required less space for installation
DATASHEET
-
The Green Push Button Contact (NO) is designed for reliable momentary operation in control panels and machinery. It features a Normally Open (NO) contact that closes only when the button is pressed.
Key Features:
-
Green push button actuator
-
Normally Open (NO) contact
-
Smooth and responsive operation
-
Fits standard 22 mm control panel systems
-
Ideal for start functions, signal activation, and general control applications
Durable and easy to install, this push button provides safe and dependable circuit control.
-
Green Sand Water Media is a high-performance filtration media designed for the removal of iron, manganese, and hydrogen sulfide (H₂S) from groundwater. It is coated with manganese dioxide, which acts as a powerful oxidizing agent—converting dissolved iron and manganese into solid particles that can be easily filtered out.
Used widely in domestic, commercial, and industrial water systems, Green Sand ensures clear, odor-free water and protects pipelines, appliances, and downstream treatment systems.
Key Features
-
Specially coated manganese dioxide (MnO₂) media
-
Efficient removal of iron, manganese, and H₂S
-
Works with chlorination, aeration, or potassium permanganate (KMnO₄)
-
Long life, stable performance, and low maintenance
-
Ideal for pressure filters and FRP/steel vessels
-
Low attrition rate and high oxidation capacity
Advantages
-
Produces clear, colorless, and odor-free water
-
Prevents staining on fixtures, tiles, and fabrics
-
Protects RO membranes, pipelines & appliances
-
Can be regenerated with potassium permanganate
-
Suitable for both high and low pH water conditions
Applications
-
Borewell / tube-well water treatment
-
Residential filtration units
-
Commercial and industrial water treatment plants
-
RO pre-treatment systems
-
Schools, hospitals, apartments, and rural water schemes
-
The 4H-210-08 Hand Lever Valve is a durable 5/2 way mechanical pneumatic valve designed for precise manual control of air flow in pneumatic systems. With a 1/4 inch port size, it offers smooth operation, reliable switching, and long service life in industrial applications.
Key Features
-
Type: 5/2 Way Hand Lever Pneumatic Valve
-
Model: 4H-210-08
-
Port Size: 1/4 inch
-
Manual Operation: Lever mechanism ensures smooth and accurate switching
-
Heavy-Duty Build: High-quality materials for long-lasting performance
-
Stable Performance: Provides reliable directional control of air flow
-
Easy Installation: Standard 1/4″ pneumatic fittings
Applications
-
Industrial automation systems
-
Pneumatic machinery and actuators
-
Material handling equipment
-
Control panels and manual air-flow regulation setups
-
Reliable industrial connectors designed for tough environments. Ideal for control panels, machines, and automation wiring.
-
Durable metal housing for rugged use
-
Rated up to 500V and 16A
-
Multiple pin counts available: 4, 6, 10, 16, 24, 32, 48, 64 pins
-
Different cable entry options: bottom open/closed, side entry, top entry
-
Easy to install and maintain with secure locking
-
Perfect for multi-wire connections in industrial settings
-
Heavy Duty Porcelain Connectors are designed for secure and reliable electrical connections in demanding environments. Manufactured from high‑grade porcelain, they offer superior heat resistance, excellent insulation, and high mechanical strength, making them ideal for heavy‑load and high‑temperature applications.
Key Features:
-
Made from high‑quality porcelain
-
High temperature and fire resistant
-
Excellent electrical insulation
-
Heavy‑duty construction for long service life
-
Provides safe and firm wire connections
Applications:
-
Industrial electrical panels
-
High‑load electrical wiring
-
Heating systems and furnaces
- Commercial and residential power installations
-
This product is a water pump, and its specifications are detailed below based on the information provided on the label:
Model: VM2-9X9
Manufacture Date: 2024.01
Qmax (Flow Rate): 75 L/min
Hmax (Head): 105 m
Suct.Hmax (Suction Head): 6 m
Size: 1″ X 1″
Motor Type: 1~Mot (single-phase motor)
Voltage: 220 V
Frequency: 50 Hz
Speed: 2850 Min⁻¹
Power: 1.5 kW (2.0 HP)
Current: 10 A
Protection Class: IP X4
Capacitor: 40 µF, 450V
Insulation Class: B
Duty Cycle: Continuous duty
-
The CMF 12-20T-A-W-G-BABE is a high-performance horizontal multistage centrifugal pump designed for water boosting and transfer applications where reliable pressure and continuous operation are required. Its compact design and stainless steel hydraulic components ensure efficient performance and long service life.
Key Features
-
Horizontal multistage centrifugal design
-
High pressure with steady flow output
-
Stainless steel impellers for corrosion resistance
-
Energy-efficient, low-noise operation
-
Compact, robust construction for easy installation
Applications
-
Pressure boosting systems
-
Water supply and distribution
-
Industrial process water
-
HVAC and cooling systems
-
RO plants and filtration systems
Technical Specifications (Typical)
-
Flow rate: up to approx. 12 m³/hr
-
Maximum head: up to approx. 20 bar
-
Motor: Three phase
-
Power supply: 415V, 50Hz
-
Suitable media: Clean water and non-corrosive liquids
-
The CMF 8-30T-A-W-G-BQBE is a horizontal multistage centrifugal pump designed for high-pressure water boosting and transfer applications. It features a compact design, efficient performance, and durable construction, making it suitable for continuous industrial and commercial use.
Key Features
-
Horizontal multistage design for high pressure
-
Stainless steel impellers for long service life
-
Smooth and quiet operation
-
Energy-efficient motor
-
Easy installation and maintenance
Typical Applications
Technical Specifications (Typical)
-
Flow rate: up to approx. 8 m³/hr
-
Maximum head: up to approx. 30 bar
-
Motor: Three phase
-
Power supply: 415V, 50Hz
-
Pumped liquid: Clean water & non-corrosive fluids
-
Product Name: Clear Braided Hose Pipe
Type: Reinforced Flexible Hose
Material: Transparent PVC with Nylon/Braided Reinforcement
Product Description
The Clear Braided Hose Pipe is a durable and flexible hose made from transparent PVC reinforced with braided nylon. The clear design allows easy visual inspection of fluid flow, while the braided reinforcement provides strength, kink resistance, and pressure durability. Ideal for industrial, laboratory, and general-purpose fluid handling applications.
Key Features
-
✔ Transparent PVC construction for easy monitoring
-
✔ Braided reinforcement for strength and durability
-
✔ Flexible and kink-resistant
-
✔ Resistant to water, air, and light chemicals
-
✔ Long-lasting and corrosion-resistant
Applications
-
Hydraulic and pneumatic systems
-
Water, oil, and chemical transfer
-
Laboratory and industrial equipment
-
General plumbing and fluid handling
Sizes Available
The Clear Braided Hose Pipe is available in a variety of standard sizes:
3/4 INCH 20mm
1/4 INCH 6mm
1/2 INCH 12mm
1 INCH 25mm
Wall Thickness: Standard reinforcement suitable for low to medium pressure
Length: Sold in rolls or cut-to-length as required
Benefits
Easy to inspect fluid flow due to transparency
Resists bursting and kinking under moderate pressure
Durable and low maintenance
Flexible for versatile installation
-
The Housing Spanner Key Wrench is a durable tool designed for opening and tightening water-filter housings used in water-treatment systems. It provides firm grip and leverage, making it easy to loosen tightly sealed filter canisters without damaging the housing. Ideal for domestic, commercial, and industrial water-filtration setups.
Made from strong, lightweight plastic (or reinforced material), it protects the housing from cracks while ensuring smooth, safe operation during filter changes.
FEATURES
-
Opens and tightens water-filter housings safely
-
Strong, durable construction
-
Designed to fit common water-treatment housing types
-
Prevents damage to plastic filter housings
-
Easy grip for quick filter replacement
AVAILABLE SIZES
Suitable for most standard water-treatment housings:
-
Slim Line Housing Wrench – Fits 4″ slim under-sink and RO housings
-
Standard 10″ Housing Wrench – Fits 10″ × 2.5″ standard filter housings
-
Big Blue 10″ Housing Wrench – Fits large-diameter 10″ Big Blue housings
-
Big Blue 20″ Housing Wrench – Fits 20″ Big Blue whole-house housings
-
Membrane Housing Wrench – Fits RO membrane housings (various models)
-
The Atlas Hydra Self-Cleaning Filter is a heavy-duty pre-filtration unit designed to remove sand, rust, silt, and suspended particles from water. It features a washable pleated filter cartridge and a built-in drain valve that allows quick cleaning without opening the housing. Ideal for protecting pumps, RO systems, pipelines, and household plumbing.
Key Features:
-
Self-cleaning design with bottom drain valve
-
Washable pleated cartridge for long service life
-
Transparent housing for easy visual monitoring
-
Suitable for domestic, commercial, and industrial water systems
-
Reduces sediment load before finer filtration stages
Available Micron Ratings: 50 micron / 90 micron
Connection Sizes: 1″ / 1.25″ / 1.5″ (varies by model)
Applications:
-
Borewell & well water filtration
-
Pre-treatment for RO plants
-
Whole-house filtration systems
-
Industrial and commercial process water
-
Product Description:
The Hydraulic Seal 522545-8 is a precision-made sealing component designed to prevent hydraulic oil leakage and maintain consistent pressure in hydraulic systems. Built for durability and reliable performance, this seal is ideal for use in demanding industrial and mobile hydraulic applications.
Key Features:
-
Precision Fit: Engineered to match OEM specifications for secure sealing
-
Leak Prevention: Effectively retains hydraulic fluid and system pressure
-
High Durability: Resistant to wear, abrasion, and hydraulic oils
-
Stable Performance: Performs reliably under high pressure and continuous operation
-
Maintenance Friendly: Easy to install during hydraulic system servicing
Applications:
-
Hydraulic cylinders
-
Industrial hydraulic machinery
-
Construction and earth-moving equipment
-
Agricultural and material handling systems
Technical Highlights:
-
Part Number: 522545-8
-
Product Type: Hydraulic Seal
-
Material: High-grade rubber / polyurethane (application dependent)
-
Function: Fluid sealing and pressure retention
-
Product Name: Hydraulic Aluminium Die Cast Heater (Round)
Type: Round Die Cast Heater
Material: Aluminium Alloy
Application: Hydraulic Tanks and Reservoirs
Product Description
The Hydraulic Aluminium Die Cast Heater (Round) is designed to efficiently heat hydraulic oil in tanks and reservoirs, ensuring optimal viscosity and smooth system operation. Made from high-quality aluminium alloy, the round die-cast heater offers excellent thermal conductivity, durability, and corrosion resistance. Ideal for industrial and mobile hydraulic systems, it helps maintain hydraulic fluid at the correct operating temperature for peak performance.
Key Features
-
✔ High-quality aluminium die-cast construction
-
✔ Efficient heat transfer and uniform heating
-
✔ Durable and resistant to corrosion
-
✔ Easy installation on hydraulic tanks and reservoirs
-
✔ Suitable for industrial and mobile hydraulic systems
Applications
-
Hydraulic power units
-
Injection moulding machines
-
Press machines and industrial equipment
-
Mobile and stationary hydraulic systems
Benefits
-
Maintains proper hydraulic oil viscosity
-
Reduces wear and tear on hydraulic components
-
Improves overall system efficiency
-
Prolongs hydraulic oil life and reduces maintenance
Specifications
-
Hydraulic Ball Valves are heavy-duty shut-off valves designed for reliable on/off control in high-pressure hydraulic systems. Featuring a precision-machined ball with a through bore, these valves provide smooth operation, minimal pressure drop, and excellent sealing performance. They are widely used in industrial, mobile, and hydraulic power applications where quick isolation of flow is required.
Key Features
-
Robust steel / stainless steel / carbon steel construction
-
Full-bore design for high flow capacity and low pressure loss
-
Quarter-turn operation for quick and easy control
-
Leak-proof sealing with high-quality seats
-
Suitable for high-pressure hydraulic oil and fluids
-
Long service life with corrosion-resistant finish
Applications
-
Hydraulic power packs
-
Construction and earth-moving machinery
-
Industrial hydraulic systems
-
Agricultural and mobile equipment
-
Oil, gas, and fluid transfer systems
Available Options
-
Sizes: 1/4″, 3/8″, 1/2″, 3/4″, 1″, and above
-
End connections: BSP / NPT
-
Pressure ratings as per hydraulic system requirements
-
Product Name: Hydraulic Coil Vickers 507847
Voltage: 12V DC
Type: Solenoid Coil for Hydraulic Valves
Product Description
The Vickers 507847 Hydraulic Coil is a high-quality solenoid coil designed for use with Vickers hydraulic valves and systems. Operating at 12V DC, it converts electrical energy into mechanical motion, allowing precise control of hydraulic flow and pressure. Built for durability, it ensures reliable operation in industrial and mobile hydraulic applications.
Key Features
-
✔ Genuine Vickers brand quality
-
✔ Operates on 12V DC
-
✔ Designed for Vickers hydraulic valves
-
✔ High reliability and long service life
-
✔ Compact and easy to install
Applications
-
Hydraulic directional control valves
-
Industrial machinery
-
Mobile hydraulics
-
Injection moulding machines
-
Presses and manufacturing equipment
Benefits
-
Precise control of hydraulic systems
-
Reduces downtime due to reliable operation
-
Easy replacement and maintenance
-
Compatible with a wide range of Vickers valves
-
Product Name: Hydraulic Return Line Filter CE-250-A-10
Application: Ferromatik Injection Moulding Machines
Filter Type: Return Line Hydraulic Filter
Product Description
The CE-250-A-10 Hydraulic Return Line Filter is designed for use in Ferromatik hydraulic systems to ensure clean and efficient oil circulation. Installed on the return line, this filter removes contaminants such as dirt, metal particles, and impurities before the oil re-enters the hydraulic tank, helping to protect pumps, valves, and other critical components.
Key Features
-
✔ Designed specifically for Ferromatik machines
-
✔ High filtration efficiency for cleaner hydraulic oil
-
✔ Protects hydraulic components from wear and damage
-
✔ Improves system performance and extends oil life
-
✔ Durable construction for industrial applications
Specifications
-
Model: CE-250-A-10
-
Filtration Rating: 10 Micron
-
Filter Position: Return Line
-
Operating Medium: Hydraulic Oil
-
Construction: Heavy-duty industrial grade
Applications
-
Injection moldings machines
-
Industrial hydraulic systems
-
Ferromatik return line filtration
-
Manufacturing and processing equipment
Benefits
-
Hydraulic pressure gauge designed for vacuum and low-pressure measurement in hydraulic, pneumatic, and water treatment systems. The back connection allows easy mounting on panels or equipment.
Specifications:
-
Pressure Range: -30 to 300 PSI
-
Dial Sizes: 2.5” (63 mm) and 4” (100 mm)
-
Connection: Back connection – 1/4” BSP (2.5”) and 3/8” BSP (4”)
-
Type: Glycerine filled
-
Material: Stainless steel case, brass internals
-
Scale: Dual scale (Vacuum / PSI)
-
Operating Temperature: -20°C to +60°C
Features:
-
Measures both vacuum and positive pressure
-
Glycerine-filled for vibration and shock resistance
-
Back connection for panel installation
-
Clear, easy-to-read dial
-
Corrosion-resistant and durable design
Applications:
Ideal for hydraulic systems, pumps, compressors, and industrial vacuum or pressure monitoring.
