Showing 21–34 of 34 results

  • SMC PNEUMATIC VALVE SMC I-SY5120 – 5LZ -01 1/8''

    SMC PNEUMATIC VALVE SMC I-SY5120 – 5LZ -01 1/8”

    0 out of 5
    Specifications
    • Valve type: 5-port, pilot type spool valve.
    • Actuation: Single solenoid.
    • Status at power off: The valve has a self-recovery feature that uses pressure differential to return to its original state.
    • Port size: 1/8 (Rc).
    • Electrical entry: L-type plug connector with a 300mm lead wire.
    • Rated voltage: The specific voltage is not defined by this part number, but SMC SY5120 valves are commonly available in 24 VDC.
    • Surge suppression: The built-in surge voltage suppressor protects the solenoid from voltage spikes.
    • Indicator light: An indicator light is included to show the operating status.
    • Operating fluid: Air.
    • Operating pressure range: 0.15 to 0.7 MPa for the internal pilot.
    • Ambient/fluid temperature: -10°C to 50°C (with no freezing).
    • Manual switch: Non-locking push type.
    • Applicable cylinder diameter: 80mm or less
    Read moreDone
  • SMC PNEUMMATIC VALVE SMC SY7220 – 5LZE – 02 1/4''

    SMC PNEUMMATIC VALVE SMC SY7220 – 5LZE – 02 1/4”

    0 out of 5
    Key Features 

    • Type: 5-port, 2-position double solenoid valve.
    • Series: SY7000.
    • Port Size: 1/4″ (7 mm).
    • Actuation: 2-position double coil.
    • Electrical Entry: L-plug connector for wiring.
    • Coil Voltage: 24 VDC.
    • Power Consumption: Low, with integrated power-saving circuit.
    • Manual Operation: Push-turn locking lever type for manual override.
    • Surge Protection: Equipped with a light/surge voltage suppressor.
    • Design: Body-ported, allowing direct connection to pneumatic systems.
    • Pressure Rating: 0.1 to 0.7 MPa.
    Read moreDone
  • SOL COIL 24VDC 8MM WITH INDICATOR (TECHNO)

    SOL COIL 24VDC 8MM WITH INDICATOR (TECHNO)

    0 out of 5

    The SOL Coil 24VDC 8mm Techno is a high-quality solenoid coil designed for precise control in pneumatic and hydraulic systems. Equipped with an indicator light, it provides visual confirmation of operation, ensuring reliability and safety in automated applications.

    Key Features

    • Voltage: 24V DC

    • Size: 8mm

    • Indicator: Built-in LED for operation status

    • Durable Construction: High-quality materials for long service life

    • Compact Design: Easy installation in tight setups

    • Efficient Operation: Reliable switching for pneumatic and hydraulic valves

    Applications

    • Pneumatic and hydraulic control systems

    • Industrial automation machinery

    • Solenoid valve actuation

    • Process control and material handling systems

    Read moreDone
  • TECHNO JM-07 KNOB ROLLOVER LEVER VALVE

    TECHNO JM-07 KNOB ROLLOVER LEVER VALVE

    0 out of 5

    Product Description:
    The TECHNO JM-07 is a compact and durable 3/2-way mechanical pneumatic valve designed for smooth and reliable control of compressed air. It features a roller lever actuator, allowing easy mechanical triggering and automatic spring return. Ideal for use in industrial machines, automation systems, and pneumatic control setups.

    Key Features:

    • 3/2-way mechanical pneumatic valve

    • Knob rollover (roller lever) actuation

    • Suitable for filtered compressed air

    • Fast response with spring-return mechanism

    • Strong aluminum body for long service life

    • Easy to install and maintain

    Specifications:

    • Port Size: 1/4″

    • Operation: Mechanical, momentary

    • Working Pressure: Up to 0.8 MPa

    • Medium: Compressed air

    Applications:

    • Pneumatic machinery

    • Automation equipment

    • Control of single-acting cylinders

    • Limit and position sensing systems

    Read moreDone
  • TECHNO PNEUMATIC VALVE MODEL: 4V210 – 08 (5/2) 1/4''

    TECHNO PNEUMATIC VALVE MODEL: 4V210 – 08 (5/2) 1/4”

    0 out of 5

    Key Specifications: 

    • Valve Type: 5/2 Way, Single Solenoid
    • Port Size: 1/4 inch (6.35mm)
    • Body Material: Aluminum Alloy
    • Operation: Pilot-operated
    • Application: Controls double-acting pneumatic cylinders and similar systems.
    Applications:
    The valve’s precise control and fast response make it suitable for a variety of industrial applications, including:
    • Industrial automation: Controlling pneumatic actuators and cylinders in automated production lines.
    • CNC and robotics: Precision control of air flow in computerized numerical control (CNC) machines and robotics.
    • Manufacturing processes: General manufacturing uses requiring reliable pneumatic control.
    • Machinery maintenance: Use in maintenance and repair tasks for machinery with pneumatic components
    Read moreDone
  • TECHNO PNEUMATIC VALVE MODEL: 4V310 – 10 (5/2) 3/8''

    TECHNO PNEUMATIC VALVE MODEL: 4V310 – 10 (5/2) 3/8”

    0 out of 5

    Key specifications :

    • Working medium: Filtered air (40 micron or better).
    • Port size: 3/8″.
    • Vent silencer port size: PT 1/4″.
    • Working pressure: 0.15–0.8 MPa (approximately 21–114 PSI).
    • Maximum working pressure: Up to 10 kgf/cm².
    • Operating temperature: 5–50°C, according to Lion Tools Mart.
    • Material: Aluminum alloy. 
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 3V310 – 10- NC (3/2) 3/8''

    TECHNO PNEUMATIC VALVE – MODEL: 3V310 – 10- NC (3/2) 3/8”

    0 out of 5
    Key features
    • Operation: A direct-acting, internal pilot-operated valve with a sliding column structure. This design provides sensitive and reliable reactions to the electrical signal.
    • Function (3/2):
      • 3-way: Features three ports for air connections.
        • P port: Air pressure inlet.
    Applications 
    • Textile machinery
    • Light industry automation
    • Chemical and pharmaceutical equipment
    • Automotive manufacturing
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 4V110 – 06 (3/2) 1/8''

    TECHNO PNEUMATIC VALVE – MODEL: 4V110 – 06 (3/2) 1/8”

    0 out of 5

    Key specifications :

    • Working medium: Filtered air (40 micron or better).
    • Port size: 1/8″.
    • Vent silencer port size: PT 1/8”
    • Working pressure: 0.15–0.8 MPa (approximately 21–114 PSI).
    • Maximum working pressure: Up to 10 kgf/cm².
    • Operating temperature: 5–50°C, according to Lion Tools Mart.
    • Material: Aluminum alloy. 
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 3V025 – 08 (1/4'')

    TECHNO PNEUMATIC VALVE – MODEL: 3V025 – 08 (1/4”)

    0 out of 5

    Key Specifications

    • Model: 3V025-08
    • Type: 3/2 Way, Normally Closed (NC) / Normally Open (NO) available
    • Port Size: Inlet/Outlet: 1/4″ (PT, NPT, or G thread)
    • Working Pressure: 0 ~ 0.7 MPa
    • Max Pressure Resistance: 1.0 MPa
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 3V110 – 06 (3/2) 1/8''

    TECHNO PNEUMATIC VALVE – MODEL: 3V110 – 06 (3/2) 1/8”

    0 out of 5
    Key Specifications
    • Model: 3V110-06
    • Type: 3/2 Way, Normally Closed (NC)
    • Port Size: Inlet/Outlet: 1/8″ (PT, NPT, or G thread)
    • Working Pressure: 0.15 ~ 0.8 MPa
    • Max Pressure Resistance: 1.2 MPa
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 3V210 – 08- NC (3/2) 1/4''

    TECHNO PNEUMATIC VALVE – MODEL: 3V210 – 08- NC (3/2) 1/4”

    0 out of 5

    Key Specifications

    • Model: 3V210-09
    • Type: 3/2 Way, Normally Closed (NC)
    • Port Size: Inlet/Outlet: 1/4″ (PT, NPT, or G thread)
    • Working Pressure: 0.15 ~ 0.8 MPa
    • Max Pressure Resistance: 1.2 MPa
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 3V410 – 15(3/2) 1/2''

    TECHNO PNEUMATIC VALVE – MODEL: 3V410 – 15(3/2) 1/2”

    0 out of 5
    Key specifications
    • Model: 3V410-15-NC
    • Brand: Techno (based on one distributor’s listing). Other sellers also offer the same model number under their own branding.
    • Configuration: 2-Position, 3-Way
    • Action: Normally Closed (NC)
    • Port Size: G1/2″ or RC1/2″
    • Working Medium: Filtered Air
    • Operating Pressure: 0.15–0.8 MPa (22–116 PSI)
    • Maximum Pressure Resistance: 1.2 MPa
    • Working Temperature: 5–50°C (41–122°F)
    Read moreDone
  • TECHNO PNEUMATIC VALVE - MODEL: 4H210 – 08

    TECHNO PNEUMATIC VALVE – MODEL: 4H210 – 08

    0 out of 5
    Parameter Value / Typical Range
    Valve Type 5-port, 2-position (5/2) manual lever valve
    Operation Hand lever (manual) actuation
    Port Size Inlet (P) = 1/4″ (PT / NPT / G types depending on configuration) (BAOMAIN)
    Outlet Ports (A, B) 1/4″ (BAOMAIN)
    Exhaust Ports (R, S) 1/8″ (eBay)
    Working Pressure ~ 25 to 116 psi (approximately 0.17 to 0.8 MPa) (Trex Houston)
    Operating Temperature Range Approx ambient / air service (e.g., 0-60 °C typical) (BAOMAIN)
    Material Aluminum alloy body (lightweight) (pneucons.com)
    Seal / Internal Construction Slide column structure, minimal friction, good tightness (Trimantec)
    Other Features Manual actuation, easy installation and removal, suitable for use in pneumatic systems with moderate pressures, relatively compact form (Trimantec)
    Read moreDone
  • TECHNO PNEUMATIC VALVE- MODEL: 4V410 – 15 (5/2) 1/2''

    TECHNO PNEUMATIC VALVE- MODEL: 4V410 – 15 (5/2) 1/2”

    0 out of 5
    Read moreDone